Wire Saw Machines

Optima has a range of wire saw machines to suit different quarrying needs. While SS20 is designed for smaller cuts, the heavy weight SS75 provides better stability and accuracy for big cuttings. With more than two decades of experience and more than 3000 wire saw machines, we have the requisite experience and expertise to meet your quarry wire saw machine needs. Our machines are rugged and easy to maintain, operate and run. They have a very low operating cost. Most of the electrical components are readily available worldwide. Our panels and electric motors have been developed specially for our wiresaw machines. Our motors can be customised depending on the voltage in your country.

We can proudly say that some of our machines have achieved a life of over 15 years!

Compare Wire Saw Machine Variants

  • SS20
  • SS40
  • SS60
  • SS75
SS20SS40SS60SS75
SS20 is designed to work on smaller cuts up to 25 sq.m., such as in block dressing of stones. It also complements SS60 and has a similar installation and services package.
We recommend it for cutting marble and smaller cuts in granite.
A completely user-friendly design, the machine has a bolstered weight of 1800 kg. This provides better stability and accuracy in quarrying. SS60 is our most popular model, and is recommended for most quarry applications.
We recommend it for cutting very big cuts in granite and hard marbles.
Dimensions & Weight
Height1000 mm1100 mm1100 mm1200 mm
Length1600 mm2600 mm2600 mm2700 mm
Width700 mm1300 mm1300 mm1300 mm
Weight1100 kg1600 kg1800 kg1900 kg
Specifications
Electric motor20HP/ 15 KW, 960 RPM, 3 Phase A.C. motor40HP/ 30 KW, 415 V3 Phase A.C. motor60HP/ 45 KW, 415 V3 Phase A.C. motor75HP/ 55 KW, 415 V3 Phase A.C. motor
Motor for traveling movement1HP DC Motor coupled with gearbox1HP DC Motor coupled with gearbox1HP DC Motor coupled with gearbox1HP DC Motor coupled with gearbox
Electrical control panel with 10 meters controls cable
Traveling track 2m x 3 numbers (6 meters total)3m x 1 number and 2m x 2 numbers (7 meters total)3m x 1 number and 2m x 2 numbers (7 meters total)3m x 1 number and 2m x 2 numbers (7 meters total)
Main pulley600 mm main pulley coupled directly on motor800 mm main pulley giving wire speed of 27m/sec800 mm main pulley giving wire speed of 27m/sec800 mm main pulley giving wire speed of 27m/sec
Guide pulley-222
Stand for guide pulley
Pulley guard and spline shaft cover guard-
Swivel arrangement for 20 HP motor---
Wire cutter
Crimping tool
GET BEST QUOTEGET BEST QUOTEGET BEST QUOTEGET BEST QUOTE

[searchandfilter id="1995"]

[searchandfilter id=”1995″ show=”results”]

SS20
SS40
SS60
SS75
SS20

SS20 is designed to work on smaller cuts up to 25 sq.m., such as in block dressing of stones. It also complements SS60 and has a similar installation and services package.

SS40
We recommend it for cutting marble and smaller cuts in granite.
SS60

A completely user-friendly design, the machine has a bolstered weight of 1800 kg. This provides better stability and accuracy in quarrying. SS60 is our most popular model, and is recommended for most quarry applications.

SS75
We recommend it for cutting very big cuts in granite and hard marbles.

Dimensions & Weight

Height – 1000 mm
Length – 1600 mm
Width – 700 mm
Weight – 1100 Kg 

Height – 1100 mm
Length – 2600 mm
Width – 1300 mm
Weight – 1600 Kg 

Height – 1100 mm
Length – 2600 mm
Width – 1300 mm
Weight – 1800 Kg 

Height – 1200 mm
Length – 2700 mm
Width – 1300 mm
Weight – 1900 Kg 

Specifications

20HP/ 15 KW, 960 RPM 3 Phase A.C. Electric Motor

1HP DC Motor coupled with gearbox for traveling movement

Electrical control panel with 10 meters controls cable

Traveling track – 2m x 3 numbers (6 meters total)

600 mm main pulley coupled directly on motor, with guide pulley stand

Guide Pulley Stand

Swivel arrangement for 20 HP motor

Wire cutter
Crimping tool

40HP/ 30 KW, 415V 3 Phase A.C. Electric Motor

1HP DC Motor coupled with gearbox for traveling movement

Electrical control panel with 10 meters controls cable

Traveling track – 3m x 1 number and 2m x 2 numbers (7 meters total)

800 mm main pulley giving wire speed of 27m/second

Guide pulley (2)

Stand for guide pulley

Pulley guard and spline shaft cover guard

Wire cutter
Crimping tool

60HP/ 45 KW, 415V 3 Phase A.C. Electric Motor

1HP DC Motor coupled with gearbox for traveling movement

Electrical control panel with 10 meters controls cable

Traveling track – 3m x 1 number and 2m x 2 numbers (7 meters total)

800 mm main pulley giving wire speed of 27m/second

Guide pulley (2)

Stand for guide pulley

Pulley guard and spline shaft cover guard

Wire cutter
Crimping tool

75HP/ 55 KW, 415V 3 Phase A.C. Electric Motor

1HP DC Motor coupled with gearbox for traveling movement

Electrical control panel with 10 meters controls cable

Traveling track – 3m x 1 number and 2m x 2 numbers (7 meters total)

800 mm main pulley giving wire speed of 27m/second

Guide pulley (2)

Stand for guide pulley

Pulley guard and spline shaft cover guard

Wire cutter
Crimping tool